How To Split A Drawing In Solidworks

SOLIDWORKS features a powerful set of Mold Tools for tackling circuitous mold designs, just it's not always necessary to use them. If you're merely trying to brand a uncomplicated cavity and mold split, you tin can easily accomplish this using the procedure outlined below.

Notation: You can use a like process with either a multi-body approach or an in-context assembly editing approach. For simplicity sake, we will cover the multi-body arroyo in this web log.

Getting Started

To get started, create a new SOLIDWORKS part file. Nosotros volition insert our part that will exist used to create the mold using the Insert Part command from the pull-down menus.

Make sure the "Solid bodies" choice is checked and click the check marking. This volition place the role aligned with the office origin.

Next, create a sketch of the profile for the mold block. Create an Extrude characteristic to the desired depth, and be certain to articulate the Merge Result option.

This will produce a 2nd solid trunk to represent the mold, which should become visible from the Solid Bodies folder on the Feature Manager Design Tree, every bit pictured above.

Subtracting From the Mold

Next, we volition subtract the original role from the mold.

Annotation: For a product mold, information technology may exist desirable to insert a Scale characteristic to recoup for shrinkage. The draft angles of the part should also be analyzed and adjusted. These factors are not considered in this tutorial.

Insert a Combine feature by accessing the pull-down menus under Insert -> Features -> Combine. Choose the Subtract option and select the mold trunk as the Master Torso, and the original part that was inserted as the Body to subtract.

Click the check marking to go along. The result should be as beneath – the part is now back down to a single torso, and if you were to create a section view (optional) you would see that the cavity has been subtracted.

Performing the Tooling Split

At present for the actual tooling separate. This requires a Plane or Surface going downward the parting line of the model. Cheque the Planes you have available and see if whatever of them satisfy this criteria. If not, create a new one using Reference Geometry -> Plane.

In this case, I will be using the Right Plane of my model, which runs down the middle, to dissever the mold block. Select the Right Airplane and and then insert the Split Feature from the pull-down menus, under Insert -> Feature -> Split.

In the Split up Feature, exist sure the desired Plane is selected every bit the Trim Tool, then click Cutting Part. Finally, check the check boxes underneath the scissors for the two bodies produced, so click the cheque marker.

The Split Feature should result in two split up mold halves, every bit seen below. That'southward all in that location is to information technology!

Since both halves exist every bit bodies within a single function file, it may be desirable to save them off as split up parts in an assembly. If you wish to do this optional footstep, Right Click on the Solid Bodies folder in the Feature Director and choose the selection "Save Bodies." Be sure to check the check boxes for each body in the resulting prompt, and besides choose the pick to create assembly.

This should issue in both bodies being saved out equally separate part files, and placed into an assembly automatically.
It'southward worth noting that the techniques described in this video can also be used for much more complex splits, such as the iii fashion split pictured below.

The but deviation in this example is that instead of using a Plane equally the trim tool for the Dissever characteristic, multiple surfaces were created in advance to be used equally Trim tools.

For more information on SOLIDWORKS or if you have any questions, contact the states at Hawk Ridge Systems today. Thank you for reading!

Source: https://hawkridgesys.com/blog/perform-simple-tooling-split-solidworks

Posted by: cruzsqualoodding1939.blogspot.com

Share this post